सुमिल केमिकल्स एस-क्रॉस फफूंदनाशक (टेबुकोनाजोल 10% + सल्फर 65% डब्ल्यूजी)

Dual-Action Fungicide for Chilli and Soybean Disease Management

सुमिल केमिकल्स एस-क्रॉस फफूंदनाशक (टेबुकोनाजोल 10% + सल्फर 65% डब्ल्यूजी) is a broad-spectrum combination fungicide designed for the management of important fungal diseases in chilli and soybean. It combines the systemic action of Tebuconazole with the contact and vapour activity of Sulphur for complementary crop protection.

S-cross provides both preventive and curative fungicidal activity. It is recommended against powdery mildew and fruit rot in chilli and leaf spot and pod blight in soybean when applied at the recommended crop and disease stage.

उत्पाद विनिर्देश

Technical Composition

Key Features of Sumil S-cross

• Dual-Action Fungicide: Combines systemic Tebuconazole with contact Sulphur for broad disease-management activity.
• Preventive Protection: Helps protect healthy crop tissues from susceptible fungal infection.
• Curative Activity: Helps manage early established infection when applied at the correct disease stage.
• Broad-Spectrum Performance: Recommended against multiple important fungal diseases in chilli and soybean.
• Prolonged Disease Control: Sumil highlights extended disease-management performance when used as recommended.
• Two-Way Mechanism: Combination of two different fungicidal components supports diversified disease management.
• WG Formulation: Water-dispersible granules allow convenient preparation of a uniform spray suspension.

Benefits of S-cross Fungicide

• Helps control powdery mildew in chilli.
• Helps manage fruit rot in chilli.
• Helps control leaf spot in soybean.
• Helps manage pod blight in soybean.
• Provides systemic and contact fungicidal action.
• Combines preventive and curative activity.
• Helps protect foliage and developing crop parts from fungal infection.
• Can be incorporated into an integrated crop disease-management program.

Recommended Crops, Diseases and Dosage

The registered recommendation for this formulation is approximately 1.25 किग्रा per hectare, equivalent to about 500 g per acre, using approximately 500 litres of water per hectare. Always confirm the current S-cross label before application.

Application Timing

Apply S-cross at the early appearance of fungal disease. Early application helps protect healthy crop tissues and manage infection before disease pressure becomes severe.

The registered formulation guidance allows approximately 2–3 sprays depending on disease infestation. Application frequency should always follow the current product label and field conditions.

Pre-Harvest Interval

The registered re-entry period is approximately 24 hours. Follow the latest product label for final harvest and re-entry instructions.

काम करने का तरीका

Tebuconazole is a systemic triazole fungicide that interferes with sterol biosynthesis in susceptible fungal pathogens. Sterols are essential for normal fungal cell membrane formation, and disruption of this process restricts fungal growth and development.

Sulphur acts primarily as a contact fungicide and also provides vapour-phase activity around treated plant surfaces. It interferes with fungal respiration and other metabolic processes, helping reduce spore germination and disease development.

The combination provides internal systemic protection together with protective surface activity for broader disease management.

S-cross for Chilli Powdery Mildew

Powdery mildew generally appears as white or grey powder-like fungal growth on chilli leaves and other plant surfaces. Heavy infection can reduce photosynthetic area and weaken crop development.

S-cross is recommended at approximately 500 g per acre for management of powdery mildew and fruit rot in chilli. Apply at the early appearance of symptoms for better disease suppression.

S-cross for Chilli Fruit Rot

Fruit rot can affect developing chilli fruits and may produce lesions, tissue breakdown and reduced marketable quality under favourable disease conditions.

The combination of Tebuconazole and Sulphur helps protect susceptible plant tissues and manage fungal development when applied according to the recommended schedule.

S-cross for Soybean Leaf Spot

Leaf spot diseases can produce discoloured or necrotic lesions on soybean foliage. Severe infection can reduce healthy leaf area and interfere with normal crop growth.

S-cross provides systemic and contact fungicidal activity for management of label-recommended soybean leaf spot disease.

S-cross for Soybean Pod Blight

Pod blight can affect reproductive plant parts and may interfere with pod and seed development when disease pressure is high.

Timely application at the early appearance of disease helps protect developing soybean plants and pods from susceptible fungal infection.

Sulphur-Based Additional Activity

The Sulphur component provides protective contact and vapour-phase fungicidal activity. Sulphur is also known to have secondary activity against susceptible mites in appropriate crop-protection uses.

However, S-cross should only be used against crop diseases and other targets specifically permitted on the current product label.

How to Use Sumil S-cross

1. Correctly identify the crop and fungal disease before spraying.
2. Confirm that the crop and disease are listed on the current S-cross label.
3. Measure the recommended quantity accurately.
4. Take a small volume of clean water in a separate container.
5. Add the required quantity of S-cross and stir thoroughly to form a uniform suspension.
6. Partially fill the spray tank with clean water.
7. Add the prepared suspension while maintaining agitation.
8. Add the remaining water and mix thoroughly.
9. Apply uniformly over the crop canopy using a properly calibrated knapsack sprayer.

Best Time to Spray

Apply S-cross when fungal disease is first observed or when environmental conditions favour disease development. Preventive or early-stage application is generally more effective than waiting until severe infection develops.

Avoid spraying during extreme weather conditions and follow the current product label regarding rainfall, temperature and crop-stage precautions.

Application Tips

• Apply at the early appearance of disease.
• Use approximately 500 g per acre for the registered chilli and soybean uses.
• Use adequate clean water for uniform crop coverage.
• Maintain agitation during spray preparation and application.
• Use properly calibrated spraying equipment.
• Ensure good coverage of foliage and disease-prone crop parts.
• Avoid unnecessary spray overlap.
• Do not exceed the label-recommended dose.
• Observe the recommended waiting period before harvest.

Dual Fungicide Technology

S-cross combines the internal activity of Tebuconazole with the external protective action of Sulphur. Tebuconazole moves into treated vegetative tissues, while Sulphur remains primarily on plant surfaces and provides protective contact activity.

This two-way approach helps provide preventive and curative disease-management benefits when the product is applied correctly.

Safety Precautions

• Wear suitable gloves, protective clothing, eye protection and a mask during mixing and spraying.
• Avoid direct contact with skin and eyes.
• Avoid inhaling granule dust or spray mist.
• Do not eat, drink or smoke while handling the fungicide.
• Wash hands and exposed skin thoroughly after application.
• Keep away from children, livestock, food and animal feed.
• Avoid contamination of ponds, canals and other natural water sources.
• Use only on crops specifically recommended on the current product label.

Why Farmers Can Choose Sumil S-cross

• Contains Tebuconazole 10% + Sulphur 65% WG.
• Broad-spectrum combination fungicide.
• Systemic and contact activity.
• Preventive and curative disease-management action.
• Recommended against chilli powdery mildew and fruit rot.
• Recommended against soybean leaf spot and pod blight.
• Prolonged disease-control support.
• Water-dispersible granular formulation.

Frequently Asked Questions

Q1. What is Sumil S-cross?

Sumil S-cross is a broad-spectrum combination fungicide containing Tebuconazole 10% + Sulphur 65% WG.

Q2. Which crops is S-cross recommended for?

The registered formulation recommendation covers chilli and soybean.

Q3. Which diseases does S-cross control in chilli?

S-cross is recommended against powdery mildew and fruit rot in chilli.

Q4. Which diseases does S-cross control in soybean?

It is recommended against leaf spot and pod blight in soybean.

Q5. What is the dose of S-cross per acre?

The registered dose is approximately 500 g per acre for both chilli and soybean.

Q6. How much water is required?

The registered recommendation is 500 litres per hectare, equivalent to approximately 200 litres per acre.

Q7. Is S-cross a systemic fungicide?

Yes. Tebuconazole provides systemic activity, while Sulphur provides contact and protective activity.

Q8. Is S-cross preventive or curative?

S-cross provides both preventive and curative fungicidal activity.

Q9. When should S-cross be sprayed?

Apply at the early appearance of fungal disease according to the crop-specific label instructions.

Q10. How many sprays are recommended?

The registered guidance allows approximately 2–3 sprays depending on disease infestation. Follow the current label for final scheduling.

Q11. What is the waiting period for chilli?

The registered pre-harvest interval is 5 days.

Q12. What is the waiting period for soybean?

The registered pre-harvest interval is 26 days.

Q13. What does WG mean?

WG means Water Dispersible Granules. The granules disperse in water to form a spray suspension.

Q14. Can S-cross be used on crops other than chilli and soybean?

Do not use it on other crops unless they are specifically included on the current registered S-cross product label.

Sumil Chemicals S-cross for Chilli and Soybean Disease Protection

सुमिल केमिकल्स एस-क्रॉस फफूंदनाशक (टेबुकोनाजोल 10% + सल्फर 65% डब्ल्यूजी) combines systemic and contact fungicidal activity for management of powdery mildew and fruit rot in chilli and leaf spot and pod blight in soybean. Timely application, correct dosage and uniform crop coverage are important for effective disease management.

Disclaimer: The details provided are for informational guidance only. Always adhere to the recommended application instructions as stated on the product label and in the accompanying leaflet.