Neptune HTP Sprayer Complete Set (Electric Motor, 3 HP) — high-output, low-noise spraying for farms, orchards & estates

Neptune’s HTP Sprayer Complete Set with Electric Motor is purpose-built for growers and contractors who need consistent pressure, fast coverage, and clean spray patterns without the fumes and start-up fuss of petrol engines. Driven by a robust 2.2 kW / 3 HP, 220 V motor at 1400 RPM, the system powers a 3 × 30 plunger pump to deliver 30–40 L/min within a wide, adjustable pressure band of 20–45 kg/cm²—ideal for pesticides, herbicides, foliar feeds, nursery sanitation, and perimeter jobs around packhouses or greenhouses.

Unlike makeshift assemblies, this ready-to-run kit balances throughput (LPM) and pressure stability so your nozzle choice, droplet size, and walking speed actually translate into uniform deposition. Electric drive means lower operating noise, no exhaust near crops, and a simplified maintenance routine—clear advantages when working in protected cultivation, residential belts, or long spray days where reliability matters.

Technical profile — numbers that guide real-world use

What makes this kit efficient in the field

• Electric convenience, professional output: 3 HP drive with smooth torque at 1400 RPM for steady pressure and flow.
• Wide pressure window: 20–45 kg/cm² lets you tune droplet size—from canopy penetration to gentle foliar coverage.
• High throughput when you need it: 30–40 L/min supports twin-gun teams or larger nozzles without starving the line.
• Durable plunger set: 3 × 30 assembly built for long service intervals when flushed and filtered correctly.
• Cleaner operation: Low noise, zero exhaust at point-of-use—better for net-houses, polyhouses, and near dwellings.

First-run blueprint (experience-based)

1. Power & protection: Use a dedicated 220 V circuit with the correct MCB and an RCD/ELCB. Keep cable runs short; fully unwind extension reels.
2. Suction integrity: Fit a foot-valve/strainer, keep suction height low, and seal all joints—air leaks cause cavitation and pressure loss.
3. Prime & test: Start with clean water; set pressure low, open the gun(s), and bring the regulator up to your target only after flow stabilizes.
4. Nozzle match: Choose tip sizes that the 30–40 LPM pump can comfortably supply; verify pattern on a clean tarp before entering the crop.
5. End-of-day routine: Flush with water, depressurize, clean strainers, and check oil level on the pump per schedule.

Compatibility & fit

• Pairs with high-pressure guns, booms, and 3/8″ to 1/2″ delivery hoses (match to flow/pressure ratings).
• Use stainless clamps and reinforced hose on the discharge; keep bends gentle to reduce friction loss.
• For twin-operator setups, add a balanced manifold with gauges to share flow evenly.

Where it adds the most value

• Agriculture: Timely pesticide, herbicide, and foliar nutrient applications across vegetables, cereals, and plantations.
• Horticulture: Nurseries, orchards, vineyards, and protected cultivation where low noise and clean exhaust-free operation matter.
• Commercial work: Estate, campus, and facility spraying—consistent patterns over larger areas with minimal downtime.

What’s in the set

• Electric motor (2.2 kW / 3 HP, 220 V) coupled to HTP 3 × 30 plunger pump
• Pressure regulator/relief assembly and inlet strainer (as per kit configuration)
• Basic fittings for suction and delivery lines (gun/hoses may vary by package)
• User leaflet and maintenance schedule

Care tips to extend service life

• Filter the tank; clean strainers daily when spraying wettable powders.
• Keep suction lines short and airtight; replace worn gaskets before they fail.
• Log hours and follow pump oil changes per manufacturer guidance.

Disclaimer

The details provided are for informational guidance only. Always adhere to the recommended application instructions as stated on the product label and in the accompanying leaflet.