वीजीटी मक्का छीलने और थ्रेशर कृषि औज़ार

Maize / Corn Peeler & Thresher – Heavy-Duty, 2 HP Required, 1200 kg/hr

This heavy-duty Maize/Corn Peeler & Thresher delivers fast peeling and clean kernel separation with minimal loss. With a high 2800 RPM shaft speed and optimized chamber, it’s ideal for farms, FPOs and custom-hiring centers seeking higher throughput and lower labor cost.

उत्पाद विनिर्देश

Parameter	विवरण
Product Type	Maize/Corn Peeler & Thresher
ब्रांड	Imported
Required Motor	2 HP (electric)
Power Supply	220 V, 50 Hz (single-phase)
Shaft Speed	2800 RPM
Productivity	~1200 kg/hour (depends on cob moisture & feed rate)
Threshing Performance	> 99%
Loss Rate	≤ 0.1%
Power Consumption	~2 units/hour (approx.)
Operation	Electric drive, manual hopper feed
Dimensions (L × W × H)	26 × 18 × 33 inches
Weight	~17 kg (machine only); ~30 kg with motor
Supply Variant	Typically supplied without motor

Key Features & Benefits

• High throughput: Up to ~1200 kg/hour for rapid post-harvest processing.
• Peel + thresh in one pass: Saves time and handling effort.
• Clean grain, low loss: >99% threshing with ≤0.1% loss under proper conditions.
• Efficient drive: Runs on a 2 HP motor; ~2 units/hour consumption.
• Compact & portable: Small footprint; easy to reposition on farm.

Best Suited For

• Small to mid-sized farms, FPOs/SHGs, custom-hiring centers.
• On-farm value addition and quicker market turnaround.

Operating Tips

• Use dried or semi-dry cobs to reduce kernel damage and improve separation.
• Maintain a steady feed rate—avoid overloading the hopper.
• Clean sieves and discharge chutes periodically to sustain capacity.
• Mount on a level surface; use proper wiring, earthing and MCB protection.

Frequently Asked Questions (FAQs)

Q1. Is the motor included? Generally supplied without a motor. It requires a 2 HP, 220 V, 50 Hz single-phase motor. Q2. What output can I expect? Approximately 1200 kg/hour in typical conditions. Throughput varies with cob moisture, grain maturity, and feed rate. Q3. Can I run it on domestic single-phase power? Yes. Ensure correct cable sizing, earthing and a suitably rated MCB by a qualified electrician. Q4. How do I minimize kernel breakage? Use sufficiently dried cobs, keep a consistent feed, avoid overloading and clean screens regularly. Q5. What is the actual power usage? About 2 units (kWh) per hour depending on load and motor efficiency. Q6. Can it process grains other than corn? It’s optimized for maize/corn peeling and threshing. Use for other grains only if compatible settings/attachments are recommended by the seller. Q7. What maintenance is required? Post-use cleaning, periodic bearing lubrication, belt tension checks and inspection of guards/fasteners. Q8. Is it easy to move? Yes. The compact frame (~17 kg without motor; ~30 kg with motor) is manageable with basic handling equipment.

Note

Performance depends on crop condition and operating practice. Verify motor specifications and installation with a qualified electrician.

Disclaimer

All information is for reference. Follow the product manual and local electrical safety codes for installation and use.