Agriculture Neptune Battery Sprayer IM-14+ — portable power for uniform field spraying
Neptune IM-14+ is a battery-powered knapsack sprayer designed for growers who want steady pressure, clean spray patterns, and fewer refills during long rounds. The unit pairs a 12V 14Ah battery with a high-pressure pump rated up to 160 PSI, an auto-cut pressure switch for protection, and a durable steel lance. With tank options in the 16–18 litre class and a compact footprint, IM-14+ suits pesticide, foliar nutrition, and sanitizing jobs where consistency and mobility matter.
Why IM-14+ is practical in the field
- Consistent pressure: Up to 160 PSI helps maintain droplet quality across different nozzles.
- Battery-first design: 12V 14Ah pack for extended operation; 1.7A charger included.
- Auto-cut safety: Built-in pressure switch helps protect the pump and conserve battery.
- Sturdy plumbing: Steel lance with plastic locking nut and a 1 m delivery hose for reach and control.
- Ready to spray: Supplied with a set of 3 nozzles for different coverage needs.
- Transport-friendly: Five-layer colour box packaging, manageable net weight for day-to-day use.
Technical details (at a glance)
Model |
Neptune IM-14+ |
Tank capacity |
16 / 18 litres |
Pump pressure (max) |
160 PSI |
Motor / control |
Auto-cut pressure switch |
Battery type |
12V, 14Ah |
Charger |
1.7 A |
Nozzles included |
3-piece set |
Lance |
Steel lance with plastic nut |
Delivery hose length |
~1 m |
Unit size (L×W×H) |
38.2 × 21 × 48.5 cm |
Battery weight |
3.0–3.1 kg |
Net weight / Gross weight |
6.2 kg / 7.2 kg |
Packing |
5-layer colour box |
What’s in the box
- IM-14+ tank and pump assembly
- 12V 14Ah rechargeable battery (pre-installed)
- 1.7A charger
- Steel lance with plastic nut
- Delivery hose (~1 m)
- Three spray nozzles
- User leaflet
Set-up & use — quick guidance
- Charge fully before first use: Connect the 1.7A charger until the indicator shows full. Avoid partial top-ups on the first cycle.
- Choose the right nozzle: Use finer tips for foliar sprays; wider patterns for surface sanitizing or coarse coverage.
- Mix safely: Prepare solution in a separate container; fill the tank through a strainer to keep debris out.
- Prime and test: Briefly run clean water to check for leaks and confirm pattern before entering the crop.
- Spray technique: Keep a steady pace and constant lance height for uniform deposition; avoid windy periods.
- After use: Flush the system with clean water; pulse the trigger so the auto-cut cycles normally; air-dry the lance and nozzles.
Battery care & maintenance
- Do not fully deplete the battery; recharge after each session.
- Store charged in a cool, dry place; disconnect the charger once full.
- Rinse tank and lines after chemical use to extend pump and seal life.
- Periodically check hose clamps, lance threads, and nozzle washers.
Typical use-cases
- Foliar nutrition and water-soluble fertilizers
- Insecticide, fungicide, and herbicide applications (as per label)
- Farmyard, equipment, and general sanitizing
Disclaimer
The details provided are for informational guidance only. Always adhere to the recommended application instructions as stated on the product label and in the accompanying leaflet.