Anand Agro Care Sulfmore Fungicide (Sulphur 80% WDG)
Anand Agro Care Sulfmore Fungicide (Sulphur 80% WDG)
Anand Agro Care Sulfmore Fungicide is a sulphur-based contact fungicide for managing powdery mildew. Its water-dispersible granules are mixed with water and sprayed onto the crop. Sulphur acts on the treated surface, so even spray coverage matters, especially where dense foliage can shield inner leaves.
Check susceptible growth for the first white, powdery patches. Where your crop label recommends Sulfmore, apply at the specified preventive or early disease stage. Check the crop directions before treating fruit trees or vines.
Product Details
| Brand | Anand Agro Care |
|---|---|
| Product name | Sulfmore |
| Product type | Contact fungicide |
| Active ingredient | Sulphur 80% |
| Formulation | WDG, water-dispersible granules |
| Target disease | Powdery mildew |
| Application | Foliar spray |
How Sulfmore Helps Manage Powdery Mildew
Sulphur acts at several sites in susceptible fungi and helps prevent spores from germinating on treated plant surfaces. Aim for an even deposit on susceptible growth. When checking the crop later, look for fresh powdery patches on new leaves and in places the spray may have missed.
Crop and Disease Reference
| Crop | Disease documented for Sulphur 80% WDG |
|---|---|
| Grapes | Powdery mildew |
| Mango | Powdery mildew |
These uses are documented for the formulation in Indian crop guidance. Confirm that your crop and disease appear on the current Sulfmore pack before spraying.
Sulfmore Dose per Litre and per Pump
Anand Agro Care lists a foliar spray rate of 2.5 g per litre of water. Use the following quantities when this rate matches the directions for your crop.
| Water in the tank | Sulfmore required |
|---|---|
| 1 litre | 2.5 g |
| 10 litres | 25 g |
| 15 litres | 37.5 g |
| 16 litres | 40 g |
Weigh the granules in grams. For a partly filled pump, calculate from the water actually added. Keep the mixture agitated during application so the dispersed material stays evenly distributed. Use the crop label to determine water volume per acre and the interval before harvest.
Sulfmore Fungicide FAQs
What does 80% WDG mean?
Sulphur makes up 80% of the formulation. WDG means water-dispersible granules, which are mixed with water for spraying.
How much Sulfmore goes into a full 15-litre pump?
At the manufacturer's rate of 2.5 g per litre, measure 37.5 g for 15 litres of water.
Can I calculate the dose per acre from the pump size?
You also need the water volume required for that acre. For an orchard or vineyard, check the crop label and measure how much water your sprayer uses to cover the canopy.
What if mildew appears again on new leaves?
Inspect new growth and check whether inner leaves received spray coverage. Follow the pack directions for the interval before any repeat application.
Choosing Anand Agro Care Sulfmore Fungicide
Look for “Sulphur 80% WDG” on the pack. Match your crop and disease to the label, then weigh the quantity needed for the water in your tank.
Disclaimer: The details provided are for informational guidance only. Always adhere to the recommended application instructions as stated on the product label and in the accompanying leaflet.
Similar Products
Best Selling
Customer Reviews
Recent Reviews
No reviews yet.
