Neptune Pressure Hose Pipe 10 mm × 100 m — built for irrigation lines, wash-downs, and sprayer runs

Neptune 10 mm × 100 m Pressure Hose is a long-reach, reinforced PVC hose made for everyday farm and yard work. The coil gives you a full 100 metres of coverage, while the flexible body routes easily around beds, sheds, and vehicles. With a nominal 10 mm size (inner bore approx. 8.5 mm), it balances clean water flow with manageable weight—ideal for drip and micro-irrigation headers, tank-to-pump links, garden watering, and wash-down jobs when paired with the right fittings.

Where this hose earns its keep

• Irrigation setup: Feeds drip/main lines and header connections without kinking when laid correctly.
• Cleaning & wash-down: Handles routine equipment and vehicle cleaning when used with a compatible nozzle or sprayer.
• Nursery & landscaping: Long beds, polyhouse rows, and remote taps where reach matters.
• General purpose water transfer: Tank refills, garden watering, and yard maintenance.

Why it’s a smart pick

• Reinforced, multi-layer PVC: Built to resist routine abrasion and on-site handling.
• 100 m coverage: Fewer joins and extensions across orchards and vegetable blocks.
• Easy to work with: Lightweight, flexible lay-flat behaviour for fast deployment and tidy recoiling.
• Steady flow: ~8.5 mm inner bore supports efficient water delivery for common ag tasks.
• Fitting-friendly: Works with 10 mm class barbs, clamps, quick-connects, and hose reels (match to size).

Technical summary

Fit & compatibility

• Use 10 mm class barbed couplers with stainless clamps for leak-free joints.
• Pairs well with battery/knapsack sprayers and hose reels when connectors are matched to size.
• For high-pressure spray guns, verify your pump’s pressure and flow are within the hose’s operating range.

Typical applications

• Gardening: Lawns, beds, hedges, nursery pots.
• Drip/micro-irrigation: Short runs from tank/pump to header lines.
• Car & equipment wash: Routine cleaning with appropriate nozzle/sprayer.

Setup & handling tips

1. Uncoil fully before first use: Let the hose relax briefly in mild sun to reduce coil memory.
2. Protect from sharp edges: Use hose guides; avoid dragging over abrasive surfaces.
3. Secure connections: Fit correct-size barbs and fresh gaskets; tighten clamps evenly.
4. Store dry and shaded: Drain after use and coil loosely to extend service life.

What you receive

• Neptune Pressure Hose Pipe — 10 mm × 100 m (single coil)

Disclaimer

The details provided are for informational guidance only. Always adhere to the recommended application instructions as stated on the product label and in the accompanying leaflet.