Radhe Agri Center Copper Sulphate Fungicide & Micronutrient

Radhe Agri Center Copper Sulphate Fungicide & Micronutrient

Radhe Agri Center Copper Sulphate Fungicide & Micronutrient is a copper-based agricultural input that provides micronutrient nutrition while also being used in suitable preventive crop-protection programmes against susceptible fungal diseases.

The supplied product specification contains a minimum of Copper (Cu) 24% and Sulfur (S) 12%. Copper is an essential plant micronutrient involved in enzymatic functions, photosynthesis and normal plant development.

Product Specifications

Technical Composition

Key Features

• Provides a concentrated source of copper micronutrient.
• Contains Copper 24% minimum and Sulfur 12% minimum.
• Supports important plant enzymatic and physiological functions.
• Helps support normal photosynthetic processes.
• Can help address copper deficiency when used according to crop requirements.
• Can be incorporated into preventive copper-based crop-protection programmes.
• Suitable for foliar spray, soil drenching and drip fertigation according to recommended use.
• Copper sulphate can also be used as a component in properly prepared Bordeaux mixture.

Benefits of Copper Sulphate

• Copper Nutrition: Supplies an essential micronutrient needed for several plant enzyme systems.
• Photosynthetic Support: Copper contributes to normal photosynthetic and metabolic activity.
• Plant Development: Adequate copper nutrition supports normal structural and physiological development.
• Copper Deficiency Management: Can be incorporated into crop nutrition programmes where copper supplementation is required.
• Preventive Disease Management: Copper sulphate has traditional copper-based fungicidal use against susceptible pathogens when applied in an appropriate registered or recommended formulation.
• Sulfur Nutrition: Also provides sulfur as part of the supplied composition.

Suitable Crops

The supplied product information lists use in crops and production systems including:

• Grapes and Vineyards
• Citrus
• Pomegranate
• Apple
• Fruit Orchards
• Cereal Crops
• Greenhouse Vegetables

Use only according to crop-specific recommendations and the current product label.

Target Diseases

The supplied product information highlights preventive copper-based use against susceptible diseases including:

• Anthracnose
• Downy Mildew
• Leaf Spots
• Selected Leaf Blight Diseases

Disease spectrum can vary by crop, pathogen and application method. Follow the current label or local agricultural recommendation for the exact crop-disease use.

Copper Deficiency Support

Copper deficiency can interfere with normal crop growth and plant metabolism. The supplied product information associates copper deficiency with symptoms such as leaf curling, terminal dieback and stunted development.

Before corrective application, consider soil or plant-tissue analysis where practical because excessive copper can also injure plants and accumulate in soil.

Foliar Application

Copper sulphate can be used in appropriate foliar programmes for copper nutrition and preventive crop protection. Apply only at the crop-specific concentration recommended on the current label because excessive copper concentration may cause phytotoxicity.

Soil Drenching

Soil application may be used where copper supplementation is required. The product information specifically mentions crops including citrus, pomegranate and apple for copper-deficiency management.

Drip Fertigation

The supplied reference also lists drip fertigation for suitable greenhouse vegetable and crop-nutrition programmes. Confirm water quality, compatibility and crop-specific concentration before applying through an irrigation system.

Use in Bordeaux Mixture

Copper sulphate is traditionally used as one component of Bordeaux mixture. Bordeaux mixture must be prepared using the correct formulation and proportions according to established agricultural recommendations.

Do not improvise mixture concentration because excessive copper or an incorrectly prepared solution can damage crop foliage.

Dosage & Application

An exact universal dosage is not provided in the supplied product information. The correct rate depends on whether Copper Sulphate is being used for foliar nutrition, soil application, fertigation or an approved crop-protection programme.

Use only according to the current physical product label and crop-specific agricultural recommendation.

How to Use

1. Identify whether the application is intended for copper nutrition or crop protection.
2. Confirm the crop-specific recommendation before preparing the solution.
3. Use clean water for dilution.
4. Measure only the recommended concentration.
5. Dissolve the product thoroughly before application.
6. Apply uniformly using the recommended foliar, soil or fertigation method.
7. Avoid excessive application or repeated copper use without crop or soil requirement.

Compatibility & Precautions

• Conduct a compatibility check before mixing with other fertilizers or crop-protection products.
• Avoid unverified tank mixtures.
• Do not exceed the crop-specific recommended concentration.
• Excessive copper can cause crop injury and long-term soil accumulation.
• Avoid unnecessary application to copper-rich soils.
• Use appropriate protective equipment during preparation and application.
• Avoid contamination of ponds, streams and other water sources.

Why Choose Radhe Agri Center Copper Sulphate?

Radhe Agri Center Copper Sulphate Fungicide & Micronutrient provides Copper 24% minimum and Sulfur 12% minimum for crop nutrition while also supporting suitable preventive copper-based disease-management programmes. It can be used through foliar, soil and fertigation methods according to crop-specific recommendations.

Frequently Asked Questions

Q1. What is Copper Sulphate Fungicide & Micronutrient?

It is a copper-based agricultural input used for copper micronutrient supplementation and suitable preventive copper-based crop-protection applications.

Q2. What is the copper content?

The supplied product specification states Copper (Cu) 24% minimum.

Q3. Does it contain sulfur?

Yes. The supplied specification states Sulfur (S) 12% minimum.

Q4. Which crops are listed for this product?

The supplied information includes grapes, citrus, pomegranate, apple, cereal crops, greenhouse vegetables and other fruit-orchard applications.

Q5. Can it be used as a foliar spray?

Yes. Foliar spray is one of the listed application methods, subject to the correct crop-specific concentration.

Q6. Can it be applied through drip irrigation?

Yes. The product information lists drip fertigation for suitable applications, subject to compatibility and crop-specific recommendations.

Q7. Can Copper Sulphate be used for Bordeaux mixture?

Yes. Copper sulphate is traditionally used as one component of Bordeaux mixture, but it must be prepared using the correct agricultural formulation and proportions.

Q8. Which diseases are mentioned for copper-based protection?

The supplied information mentions anthracnose, downy mildew and leaf-spot related diseases among its preventive crop-protection uses.

Q9. Can too much Copper Sulphate damage crops?

Yes. Excessive copper concentration can cause phytotoxicity, and repeated excessive application may lead to copper accumulation in soil.

Q10. What dose should be used?

The correct dose depends on the crop, application method and intended use. Follow the current product label or crop-specific agricultural recommendation.

Radhe Agri Center Copper Sulphate for Copper Nutrition & Crop Protection

Radhe Agri Center Copper Sulphate Fungicide & Micronutrient supplies Copper 24% minimum and Sulfur 12% minimum to support crop nutrition, copper-deficiency management and suitable preventive copper-based disease-protection programmes.

Disclaimer: The details provided are for informational guidance only. Always adhere to the recommended application instructions as stated on the product label and in the accompanying leaflet.